|
|
|
PRODUCTS LIST
Home > Product Show
|
RS-250 CT Head with 5 slices to test all parameters of computerized tomograph
Product Numbers: 201388141256
Product description: RS-250
CT Head with 5 slices to test all parameters of computerized tomograph
|
|
|
INTRODUCTION
| |
Computed Tomography Head Phantom. |
|
|
 Anthropomorphic
Molded Around Skull
Checks Important Physical Parameters
Provides Realistic System Check
Ideal For Training
Polycarbonate Base Dimensioned For Scans Parallel or Perpendicular to Longitudinal Axis
SECTION A: Aluminum plates, 0.4mm thick, set at a 45° angle, measure beam width and slice thickness.
SECTION B: The dosimetry section provides patient-exposure controls, and checks on abnormal internal doses before actual patient scans. Customization to accommodate TLD with rods or chips is available.
SECTION C: Cylindrical tumors of graded sizes and radiodensities establish high and low-contrast resolution and demonstrate partial beam-averaging effects.
SECTION D: The anthropomorphic section provides actual auditory ossicles in an air-contrast inner ear and a fractured petrous bone. Small tumors in the posterior fossa are placed in an area which most scanners image with difficulty.
SECTION E: 1/4 Inch diameter aluminum rod on the phantom's longitudinal axis, checks general alignment, and "DryWater" gives a realistic "noise check."
|
|
Radiation Instruments
Dosimeters film
